Prikka Strip Each strip is 500mm long, 45mm wide and 15mm high which delivers maximum deterrent but minimum harm. The unique double-hinge design allows it to be formed neatly on fence tops, pipes and other irregular surfaces. Click here to find out more
Prikka-Strip is a triple row of pointed cones, moulded from polypropylene with excellent UV weathering resistance. The points are staggered for maximum effect.
Each strip is 500mm long, 45mm wide and 15mm high which delivers maximum deterrent but minimum harm.
The unique double-hinge design
The unique double-hinge design allows it to be formed neatly on fence tops, pipes and other irregular surfaces.
The Intruder Excluder Instructions
• The effective, low-cost deterrent against unwelcome intruders • Fits to tops of fences, gates, pipes, walls, sills etc • Designed to deliver maximum discomfort, but minimum harm • The unique double-hinge design allows easy fixing to angled surfaces • Easy to use - the 500mm x 45mm strips can be screwed, nailed or glued* • Fit side by side to increase effective width on walls, ledges and sills • Made from unobtrusive neutral grey/brown polypropylene, Prikka-Strip is weatherproof and durable, re-usable and recyclable.
• Screwing/nailing Prikka-Strip can be screwed or nailed (rustproof) using the holes provided (more holes can be drilled if needed)
• Trimming Trim to size using a suitable saw. Curves and bends can be formed by immersing in very hot water. Prikka-Strip can also be easily cut to a double or single row strip using the hinge grooves as a guide
• Gluing Ensure surfaces are clean, dry and free from dust.
Please note, that many glues and adhesives will not adhere to polypropylene - screwing or nailing is recommended (external quality butyl and solvent-based sealants/adhesives perform reasonably well). Silicone, bitumen, acrylic and water-soluble (nail adhesives are not recommended). The base of Prikka-Strip should be scored or roughened with an abrasive to provide a key for the adhesive.
